IT cooling Chilers Heat Pumps & Multifuctions

سری Next

سری  Next
سیستم خنک کننده به صورت بالازن ، پایین زن ، روبروزن و کندانسورهوایی
خصوصیت اصلی این سیستم خنک کننده این می باشد که برای توزیع برودت از کف کاذب استفاده می شود و مبرد آن از نوع آی حنک می باشد

Downloud بارگذاری

تهویه پکیج گروه آر سی
این نوع سیستم خنک کننده که به نام تهویه پکیج یاCARC نیز نامیده می شود یک سیستم خنک کننده دقیق برای تامین برودت موردنیاز مراکز حساس به صورت 7 × 24 می باشد .این نوع سیستم خنک کننده معمولا" از نوع پایین زن استفاده می گردد تا هوای خنک تولیدی خود را از طریق کف کاذب به محل موردنظر هدایت نماید.

طراحی ، ساخت و تست این محصول با استفاده از استاندارد ایزو9001 می باشد و کاملا" منطبق بر مراجع زیر می باشد:

The machines are in full compliance with European Norms 2006/42CE, 2006/95CE, 2004/108CE, 97/23CE and subsequent amendments.


Cooling capacity: 

  • S version with single refrigerant circuit 6,4 ÷ 47,4 kW 
  • DC version with double refrigerant circuit 22,9 ÷ 97,4 kW 


 Base in aluminium extrusion, painted with epoxy powders.
Inner frame and upper frame in aluminium profile, painted with epoxy powders. The inner frame is provided with seals to ensure air tight with the panels.
Galvanized steel sheet panels externally coated with PVC film and internally insulated with noise absorption material.
The panels are fixed to the frame with non visible mounting system.
Electric board in separate technical compartment on the machine front 
Separate technical compartment on machine front for electric board, refrigerant and hydraulic connections and control and regulation devices
• OVER version
- Air intake from the front through honeycomb type grille and air delivery from the top.
- Washable air pre-filters with G2 efficiency, with cells in synthetic fibre (size H0 excluded).
• UNDER version
• Orbiting spiral (SCROLL) hermetic compressors with spiral profile optimized for R410A refrigerant.
Washable air filters with G4 efficiency, with cells in synthetic fibre and metallic frame (EN 779-2002).
• Heat exchanger coil with internally corrugated copper tubes and high efficiency aluminium fins, specifically developed to provide high heat transfer and lower pressure drops.
- With single refrigerant circuit for S version machines.
- With double refrigerant circuit for DC version machines.
• Centrifugal fans with backward curved blades, single suction and without scroll housings (Plug-fans), directly coupled to external rotor electric motor.
Brushless type synchronous EC motor with integrated electronic commutated system and continuous variation of the rotation speed.
The motor rotation control is obtained with the EC system (Electronic Commutation) that manage the motor according to the 0÷10V proportional signal coming from the microprocessor control.
• Thermostatic expansion valve.
• Sight glass.
• Filter dryer on liquid line.
• Pressure transducers with indication, control and protection functions, on low and high refrigerant pressure.
• High pressure safety switch with manual reset.
• Liquid receiver with accessories.
• Refrigerant circuit with copper tubing with anticondensate insulation of the suction line.
• Plastic capillary hoses for pressure sensors connection.
• R410A refrigerant charge.
- Valves on gas delivery and liquid return for coupling to remote air cooled condenser.
- 0÷10V proportional signal to manage the condensing control system of the remote air cooled condenser.
• Electrical panel in accordance with EN60204-1 norms complete with main switch with door lock safety.
• microprocessor system 

• Power supply:
- 230/1/50 for model 006 P1 S H0.
- 400/3/50 for the other models.